Pro-Built Tools PB1200 Series Manual de Instalação descarregar pdf (Página 31)

GTO 4000XL Instruction Manual © 091610 21

Push-To-Open Installation Information

Swinging gates shall not open into public access areas!

A “Push-to-Open” gate opens out from the property (operator arm extends to open the gate). A Push-To-

Open installation requires the purchase of a Push-To-Open Bracket

[R4388].

In a Push-To-Open installation the operator is installed while the gate is in the CLOSED POSITION.

Install the Operator

Follow directions for installing the

4000XL beginning on page 7. The Push-

To-Open installation diers from the

Pull-To-Open installation in the following

ways:

1. In a Push-To-Open installation, the arm

fully extends to open the gate, and it

fully retracts to close the gate. (C)

2. You will install the operator while the

gate is in the CLOSED POSITION (arm

fully retracted). (A)

3. You must use the Push-to-Open Post

Pivot Bracket [R4388] in the Post Bracket assembly(B).

4. IMPORTANT: While determining the mounting point for the

post pivot bracket assembly be sure that the position allows

for 2” clearance between the gate and the operator in both the

open and closed positions (see diagram below). This clearance

will give the operator the most ecient leverage point for

opening and closing the gate and more importantly provides

the least possible pinch area. (C)

Level Operator

Fence Post

Clevis Pin, Bushing, and Hairpin Clip

Gate In Closed Position

3/8" x 3" Bolt

Push-To-Open

Post Pivot Bracket

Post Bracket

3/8" Nut

3/8" Lock Washer

3/8" Washer

Gate in the Open Position

Pinch Area

2" minimum

Gate in the Closed Position

Pinch Area

2" minimum

*The Troubleshooting Wizard

has detailed information on

Push-To-Open installations.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 39 40

Comentários a estes Manuais

Sem comentários

Pro-Built Tools PB1200 Series Manual de Instalação Página 31

Comentários a estes Manuais