search

Pro-Built Tools PB1200 Series Manual de Instalação Página 32

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 31
22 GTO 4000XL Instruction Manual © 091610
Set Control Board for Push-To-Open
Make sure the control box power switch is OFF. Use a small
screwdriver to move the Number 3 DIP switch from the
factory setting (OFF / Pull-To-Open) to ON for Push-To-Open.
Turn power switch ON. The control board is now congured
to push the gate open.
Setting the Open Position Limit (Push-To-Open Installations)
Step 1
Conrm that the power switch is in the ON position, and the gate is in the CLOSED POSITION.
Step 2
Activate your operator by pressing the entry transmitter button. Your gate should now be moving from
the closed position toward the open position. Prepare to STOP gate by pressing the entry transmitter
button again when the gate reaches the desired open position. This step may be repeated until desired
open position is achieved. Once the desired OPEN position has been achieved, proceed to Step 3.
Step 3
With the gate in the desired open position PRESS & HOLD the “LEARN MAST LIMIT” button on the control
board for 2 seconds.
Step 4
Press the transmitter button and allow
the gate to return to the closed position.
YOURGATE’SOPENPOSITIONLIMITIS
NOW PROGRAMMED.
TESTING YOUR OPEN LIMIT SETTING:
Press your entry transmitter and allow
your gate to open. If the OPEN position
is not correct or needs to be changed,
you will need to CLEAR your OPEN LIMIT
settings and follow steps one (1) to four
(4) again.
CLEARING PROGRAMMED OPEN LIMIT
SETTING:
If you make a mistake and set the limit
at the wrong position – press your
transmitter to return the gate to the fully
closed position, then press and hold
the “LEARN MAST LIMIT” button for 2
seconds. This will clear the memory for
the open limit position. Follow steps one
(1) to four (4) again.
Learn Master Limit
Button
1 2 3 4
ON DIP
STATUS
LEARN RMT
LEARN
MAST LIMIT
LEARN
2ND LIMIT
S3
S4
S2
SOFT START OFF
WARNING OFF
OPEN PULL
SLV OPEN DLY.
MODE1 OFF
MODE2 OFF
ON
ON
PUSH
SIMULT.
ON
ON
120 MIN MAX
AUTO CLOSE TIME STALL FORCE
ON
OFF
DIP#3
ON: Push-to-open operation.
OFF: Pull-to-open operation (factory setting).
1
ON
234
1 2 3 4
ON
OFF
SOFT START OFF
WARNING OFF
OPEN PULL
2ND OPEN DLY.
MODE1 OFF
MODE2 OFF
ON
ON
PUSH
SIMULT.
ON
ON
120 MIN MAX
AUTO CLOSE TIME STALL FORCE
1 2 3 4
ON
OFF
SOFT START OFF
WARNING OFF
OPEN PULL
2ND OPEN DLY.
MODE1 OFF
ON
ON
PUSH
SIMULT.
ON
120 MIN MAX
120 MIN MAX
120 MIN MAX
120 MIN MAX
120 MIN MAX
120 MIN MAX
120 MIN MAX
AUTO CLOSE TIME STALL FORCE
AUTO CLOSE TIME STALL FORCE
AUTO CLOSE TIME STALL FORCE
1 2 3 4
ON DIP
SOFT START OFF
WARNING OFF
OPEN PULL
SLV OPEN DLY.
MODE1 OFF
MODE2 OFF
ON
ON
PUSH
SIMULT.
ON
ON
120 MIN
Vista de página 31
1 2 ... 27 28 29 30 31 32 33 34 35 36 37 38 39 40

Comentários a estes Manuais

Sem comentários
  • Gardensun Lawn Genie Dynapace Columbia-house Adaptivation
  • Califone Rádios JVC Recetor Acer TVs e monitores Mustang Survival não DeWalt Dispositivos de limpeza de alta pressão
  • Cisco PLE200 Vulcan VCCG24 Jjc RM-E10 JCB SITEMASTER 2
  • Samsung SGH-X140 Manual do Utilizador Falmec Gruppo Incasso Especificações Targus TSS64706EU Ficha Técnica Sony HT-RT3 Manual do Utilizador Sony STR-DN840 Manual do Utilizador

    • © 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.049 s |
    Manymanuals.com Manymanuals.de Manymanuals.fr Manymanuals.it
    Manymanuals.pl Manymanuals.cz Manymanuals.es Manymanuals-pt.com